Opis
- Class D amplifier with built-in DSP
High efficiency amplifier with high quality sound - 2-channel stereo amplifier
2×25 Watts @8 ohm or 2×35 Watts @4 ohm both in stereo - Bridge mode
1×34 Watts @8 ohm or 1×56 Watts @4 ohm both in bridge mode - USB audio
Provides audio playback and volume control on connected PC or Mac - 1 LAN port
Enables control of the amplifier and adds two extra RS-232 ports for expansion of the control system - 2 Bi-directional RS-232 ports
Used for control or expanding the AV system with more devices - 4 General Purpose I/O ports
Used for extra input/output ports for control of relays, switches and sensors. - Auto power function
Powers on when signal is detected, and enter sleep-mode automatically after 15 minutes without signal - Input 1 Mix function
Possible to set Input 1 as an input, that mixes with the current selected input. - 3 band equalizer
Works as an active filter for bass, mid and treble - LED indicators on the front
Convenient located on the front for easy performance indication - Easy mounting
Can be mounted in trunking systems, hidden or in 1RU using the Neets Rack Shelf - Configuration
Configuration is done directly using a built-in configuration area that fully integrates with Neets Project Designer
br>
Output power
Stereo: 2 x 25 W @ 8 ohm
Stereo: 2 x 35 W @ 4 ohm
Bridge: 1 x 35 W @ 8 ohm
Bridge: 1 x 55 W @ 4 ohm
THD+N, 20 Hz – 20 kHz < 0.1 % @ 1 W
Connector: 4 pin screw block
Analog audio input:
Unbalanced inputs.: 4 stereo inputs
Input impedance: < 100 k Ohm
Max input level: 2 Vrms
Input gain adjustable: +/- 12 dB
Wake on signal: Adjustable level
Connector: 2 x 4 RCA female
USB audio input:
Supported OS:
MAC OS-X
Windows XP, Vista, 7, 8, 8.1, 10
Bit depth: 16 bit
Sample rate: 48 kHz
Controls: Volume, mute
Wake on signal: Trigger on 5V USB
Connector: USB-B female
Power input:
Input voltage: 24 VDC
Max power usage : 50 W
Standby power usage: < 3 W
Connector: 5,5 mm DC plug
Input voltage: 100 VAC ? 240 VAC
Line frequency: 50 Hz ? 60 Hz
Max power usage: 70 W
Connector: Cable with prong matching country of sale
Network (LAN):
Speed: 10/ 100 Mbit
Duplex modes: Half or Full
DHCP: Default off
Default IP: 192.168.254.252
Default gateway: 192.168.254.252
Default subnet mask: 255.255.255.0
Connector : RJ45 with LED
RS-232 / IR ports:
Ports: 2 x bidirectional
Baud rate: 1200 ? 115200 bit/sec
Data bits : 7, 8
Parity: Even, Odd, None
Stop bits: 1, 2
IR frequency: 400 Hz to 500 KHz
Connector: 2 x 3 pin screw blocks
Ports: 4 x I/O
Input trigger low: < 1VDC
Input trigger high: > 4VDC
Output type: Open drain
Isolated output: No
Max voltage load: 24 VDC
Max current: 0.5 A
Connector : 5 pin screw block
Dimensions:
Width: 218 mm
Depth: 70 mm
Height: 37 mm
Width: 8.58 Inches
Depth: 2,76 Inches
Height: 1,46 Inches
General:
Weight: 0.5 kg
Storage temperature: -20 °C to 50 °C
Storage moisture: Non condensing
Operation temperature: 0 °C to 30 °C
Operation moisture: Non condensing
Approvals:
IEC/EN 61000-6-1
IEC/EN 61000-6-2