Opis
Neets 7" Touch Panel and Neets Control – TanGo
One screen for your your AV equipment
Neets Touch Panel? is a stunning touch panel designed to work seamlessly with the Neets Control – TanGo?. You can choose between a white or a black version of the Touch Panel. The aim of Neets is to unify all user interactions with AV equipment and room functions into one easy-to-use control. This lead to the creations of the Neets Touch Panel and Neets Control – TanGo. This bundle is the perfect solution for rooms with the need for a dedicated and LAN wired control solution. The table-mount comes as an accessory.
- Neets 7" Touch Panel
Compatible with Neets Control Systems Sierra II, TanGo, AlFa II and DelTa
Can be wall- or table mounted
Fits standard 1-gang DK, EU or US back box
Has proximity sensor that detects presence nearby
Can be powered through PoE
Firmware can be easily upgraded through USB port at the back - Neets Control – TanGo
Has 3 Bi-directional RS-232 port or IR ports used to control projectors, displays, amplifiers & other AV devices with feedback functionality
2 Uni-directional RS-232 or IR ports used to send commands to projectors or other AV devices using serial or infrared communication
8 General Purpose I/O ports used for input/output control of relays, switches and sensors
4 Built-in low-voltage relays used for controlling external devices as electrical screens
Ethernet port used to control 10 LAN and 8 Neets extension devices, to connect to Central Control, Neets Project Designer as well as access to graphical user interface
Power over Ethernet (PoE) IN to power the control system and PoE OUT to power an external device such as touch panel
Email notification on lamp/filter hours and warnings
1 NEB port (Neets Expansion Bus) to add up to 5 additional devices – choose between Keypad, Level Control or Port Expansion (serial and I/O)
1 front USB port used for easy system configuration, uploading and downloading project files
Built-in Infrared Learner at the front for easy IR code learning
Can be mounted in trunking systems hidden from sight, or in the 1U Neets Rack Shelf
br>
Neets 7″ Touch Panel
Part no: 313-0001
Physical Dimensions:
H: 120 mm / 4.72 inches
W: 180 mm / 7.08 inches
D: 41,4 mm / 1.63 inches
-On wall: 16mm / 0.63 inches
Weight:
Product: 0,33 Kg
Wall Bracket: 0,175 Kg
Shipping: 0,85 Kg
Environment:
Operating Temp: 0 to 40 °C
Storage Temp: 0 to 60 °C
Connections:
RJ45 with PoE ? For both Power and Ethernet communication
Micro USB (for FW upgrade only)
Switches:
Pin hole switch:
1: Access to Admin settings
2: Factory Reset switch
3: For FW upgrade only
Touch Screen:
Scratch resistant glass-on-glass touch screen
Display:
7? IPS Display
Resolution: 1024×595 pixels
Dpi : 170
Brightness: 350 nits (cd/m2)
LED Backlight Lifetime: 20000 hours
Proximity sensor ? For automatic display activation
Ambient Light sensor ? For automatic backlight dimming
Power:
Power over Ethernet (PoE), IEEE802.3af, 48V
Class 3 (up to 13 watt)
Note: PoE Injector not included.
Link to compliant PoE Injector
Compliancy; CE, FCC
Neets Control – TanGo
Part no: 310-0305
General:
Width: 218 mm
Height: 37 mm
Depth: 70 mm
Width: 8,58 inches
Height: 2,76 inches
Depth: 1,46 inches
Weight: 0.5 kg.
Shipping weight: 1.0 kg.
Shipping dimension: 282 mm / 188 mm /
(W/D/H) 55 mm
Storage temperature -20 °C to 50 °C
Storage moisture Non-condensing
Operation temperature 0 °C to 30 °C
Operation moisture Non-condensing
RS-232 / IR port:
Ports: 3 x bidirectional and 2 x unidirectional
Baud rate 1200 ? 115200 bit/sec
Data bits 7, 8
Parity Even, Odd, None
Stop bits 1, 2
IR frequency 400 Hz to 500 KHz
Connector 3 pin screw block
IR Learn frequency 1 KHz to 150 KHz
Input / Output:
Ports 8 x I/O
Input trigger low < 1VDC
Input trigger high > 4VDC
Output type Open drain
Isolated output No
Max voltage load 24 VDC
Max current 0.5 A
Connector 4 pin screw block
Relay Output :
Voltage max 30 VDC
Current max 0.5 A
Connector 2 pin screw block
Network (LAN):
Speed 10 / 100 Mbit
Duplex modes Half or Full
DHCP Default off
Default IP 192.168.254.252
Default gateway 192.168.1.1
Default subnet mask 255.255.255.0
PoE ? Power over Ethernet:
TanGo is IEEE 802.3 compliant. This entails it will work with both 802.3af and 802.3at devices
Note: PoE Injector not included. Use PoE Injector (Product Item number: 302-000508)
Approvals:
IEC/EN 61000-6-1
IEC/EN 61000-6-2
FCC Part 15, Class A
CE