Opis
- Neets 4" Touch Panel
The format of the 4? touch panel is known by the user from smartphones, giving a higher degree of recognizability.
The panel is connected to a separate control system that can be programmed to match your needs perfectly.
The touch panel’s ARONA interface can also be customized to fit corporate branding.
Fits standard 1-gang DK, EU or US back box. Wall bracket included.
Power the touch panel with a compliant PoE power supply (PoE injector not included) - Neets Control – Tango
Has 3 Bi-directional RS-232 port or IR ports used to control projectors, displays, amplifiers & other AV devices with feedback functionality.
2 Uni-directional RS-232 or IR ports used to send commands to projectors or other AV devices using serial or infrared communication.
8 General Purpose I/O ports used for input/output control of relays, switches and sensors.
4 Built-in low-voltage relays used for controlling external devices as electrical screens.
Ethernet port used to control 10 LAN and 8 Neets extension devices, to connect to Central Control, Neets Project Designer as well as access to graphical user interface.
Power over Ethernet (PoE) IN to power the control system and PoE OUT to power an external device such as touch panel.
Email notification on lamp/filter hours and warnings.
1 NEB port (Neets Expansion Bus) to add up to 5 additional devices – choose between Keypad, Level Control or Port Expansion (serial and I/O).
1 front USB port used for easy system configuration, uploading and downloading project files.
Built-in Infrared Learner at the front for easy IR code learning.
Can be mounted in trunking systems hidden from sight, or in the 1U Neets Rack Shelf.
br>
Neets 4″ Touch Panel
Part number: 313-0005
General:
800×480 resolution IPS panel with full viewing angle (brightness 400 nits).
Dpi : 234
PoE support
Power through PoE (Power over Ethernet).
Class 2 (up to 6,5 watt)
Sensors
Proximity sensor ? For automatic display activation
Ambient Light sensor ? For automatic backlight dimming.
Touch Screen
Scratch resistant glass-on-glass touch screen.
Connections
RJ45 with POE ? For both Power and Ethernet communication
Micro USB (for FW upgrade only).
Design Templates
Use graphical templates or completely customize the GUI in Project Designer.
Wall-mount
Fits standard 1-gang DK, EU or US back box and wall bracket included.
Control System compatibility
Compatible with Neets Control Systems SieRRa II, TanGo, AlFa II, DelTa and LiMa.
Part no: 310-0305
General:
Width: 218 mm
Height: 37 mm
Depth: 70 mm
Width: 8,58 inches
Height: 2,76 inches
Depth: 1,46 inches
Weight: 0.5 kg.
Shipping weight: 1.0 kg.
Shipping dimension: 282 mm / 188 mm /
(W/D/H) 55 mm
Storage temperature -20 °C to 50 °C
Storage moisture Non-condensing
Operation temperature 0 °C to 30 °C
Operation moisture Non-condensing
RS-232 / IR port:
Ports: 3 x bidirectional and 2 x unidirectional
Baud rate 1200 ? 115200 bit/sec
Data bits 7, 8
Parity Even, Odd, None
Stop bits 1, 2
IR frequency 400 Hz to 500 KHz
Connector 3 pin screw block
IR learn:
IR Learn frequency 1 KHz to 150 KHz
Ports 8 x I/O
Input trigger low < 1VDC
Input trigger high > 4VDC
Output type Open drain
Isolated output No
Max voltage load 24 VDC
Max current 0.5 A
Connector 4 pin screw blockRelay Output :
Voltage max 30 VDC
Current max 0.5 A
Connector 2 pin screw block
Network (LAN):
Speed 10 / 100 Mbit
Duplex modes Half or Full
DHCP Default off
Default IP 192.168.254.252
Default gateway 192.168.1.1
Default subnet mask 255.255.255.0
PoE ? Power over Ethernet:
TanGo is IEEE 802.3 compliant. This entails it will work with both 802.3af and 802.3at devices
Note: PoE Injector not included. Use PoE Injector (Product Item number: 302-000508)
Approvals:
IEC/EN 61000-6-1
IEC/EN 61000-6-2
FCC Part 15, Class A
CE