Opis
- Rack mounted AV control system with iOS/Android support
The world?s most compact AV control system ? no external processors required - 1 Bi-directional RS-485 port
Used for controlling projectors, displays, amplifiers & other AV devices with
feedback functionality - 3 Bi-directional RS-232 port or 6 IR ports
Used for controlling projectors, displays, amplifiers & other AV devices with feedback functionality - 5 Uni-directional RS-232 or 10 IR ports
Used for sending commands to projectors or other AV devices using serial or infrared communication - 1 Ethernet port
Used for controlling 10 LAN devices and connection to Central Control and Project Designer - 16 General Purpose I/O ports
Used for input/output control of relays, switches and sensors - Built-in relays
2 x potential free relays (assignable) - 1 NEB port (Neets Expansion Bus)
Add. up to 5 additional devices – choose between Keypad, Level Control or Port Expansion (serial and I/O) - Audio mixer (built-in)
Control audio from up to 6 difference sources. Transmit audio to 2 external amplifiers - 2 Lighting controls
Control and dim lighting levels in rooms and meeting facilities - Custom graphical user interface (GUI)
Create your own custom graphical user interface for the AV-installation in your own design - Automatic timer functions
A build-in timer can be set to switch a projector or a screen off after a period of inactivity - Email notifications and warnings
Email notification on lamp/filter hours and warnings - Built-in Infrared Learner
IR learner built into the front for easy IR code learning - Intuitive configuration
Drag and drop configuration through our free and no-license software: Neets Project Designer
br>
Voltage 97VAC – 240VAC
Frequency 47Hz – 63Hz
Power usage 8W
Connector type IEC plug
Relay Output:
Voltage max 240VAC
Current max 8A
Load max AC1 1150W @ 230VAC
Load max AC15 500W @ 230VAC
Single phase motor 370W @ 230VAC
Connector 3 pin screw block
0-10V output:
Output error +/- 0.01% full scale
Min step (full scale) 2048
Mode options 0-10V, 1-10V, free
Output impedance 10R
Output current max 25 mA / 400 ohm
Connector 2 pin screw block
Input / Output:
Input trigger low < 1VDC
Input trigger high > 4VDC
Output type Open drain
Isolated output No
Max voltage load 24VDC
Max current 0.5A
Connector 5 pin screw block
RS-232
Baud rate 1200-115200bit/sec
Data bits 7 ? 8
Parity Even, Odd, None
Stop bits 1/2
Duplex modes: Half or full
Baud rate: 1200-115200bit/sec
Data bits 7 ? 8
Parity Even, Odd, None
Stop bits 1/2
IR:
Transmit frequency 400Hz to 500 KHz
IR Learn frequency 1KHz to 150 KHz
Devices. 10
Network (LAN):
Speed 10/100Mbit
Duplex modes Half or full
DHCP Default off
Default IP 192.168.254.252
Default gateway 192.168.1.1
Default subnet mask 255.255.255.0
Audio:
Un- or Balanced inputs 4
Microphone or line input 1
Unbalanced input 1
Un- or Balanced outputs 2
Microphone gain 30dB – 42dB
Mic SNR (@3,6mV RMS) <93dB
Line in SNR (@ 1V RMS) <92dB
Channel separation <95dB
Frequency response 20Hz – 20KHz +/-1dB
Input level max (THD 1%) 2.3VRMS
Output max (THD 1%) 2.3VRMS
Balanced input Gain 0 – 6dB
Volume level 0 – 79dB
Mute <100dB
Type Micro-SD,
Card size min / max size 1Gb / 4Gb
File system FAT 32
Dimensions:
Width: 483 mm/ 437 mm
Height: 44 mm (1.75?) (1U)
Depth: 146 mm
Dimensions:
Width: 19,01 inches/ 17,20 inches
Height: 1,73 inches (1U)
Depth: 5,55 inches
Weight:
1.9kg/ 4.1lbs/ 67,02 oz
Weight shipping
2.2kg/ 4.9lbs/ 77,60oz
Shipping dimensions:
(W/D/H) 530mm / 230mm / 80mm
Storage temperature -20°C to 50°C
Storage moisture Non condensing
Operation temperature 0°C to 30°C
Operation moisture Non condensing